Advanced (Recording pictures)
- 64 -
Aperture-priority AE
Set the aperture value to a higher number
when you want a sharp focus background.
Set the aperture value to a lower number
when you want a soft focus background.
1 Tilt the joystick towards 3/4 to set
the aperture value.
2 Take a picture.
• Refer to P66 for the available aperture
values and the shutter speed.
• Set the aperture value to a higher number
when the subject is too bright. Set the
aperture value to a lower number when the
subject is too dim.
• The brightness of the LCD monitor/
Viewfinder and the recorded pictures may
differ. Check the pictures using the review
function or playback mode.
• The aperture value and the shutter speed
displayed on the screen turn red when the
exposure is not adequate.
Shutter-priority AE
When you want to take a sharp picture of a
fast moving subject, set with a faster shutter
speed. When you want to create a trail effect,
set to a slower shutter speed.
1 Tilt the joystick towards 3/4 to set
the shutter speed.
2 Take a picture.
• Refer to P66 for the available aperture
values and the shutter speed.
• The brightness of the LCD monitor/
Viewfinder may differ from the brightness of
the actual pictures. Check the pictures using
the review function or playback mode.
• You cannot set the following items in
Shutter-priority AE.
– Slow sync./Red-eye reduction [ ]
– [INTELLIGENT ISO]
• The aperture value and the shutter speed
displayed on the screen turn red when the
exposure is not adequate.
• We recommend using a tripod when the
shutter speed is slow.
6
F2.8
F3.2
1/30
6
1/30
F3.2
1/40
To Next Page
Loading...
