Advanced (Recording pictures)
- 90 -
Displaying the Time at
the Travel Destination
(World Time)
If you set your home area and the travel
destination area when travelling abroad etc.,
the local time at the travel destination area
can be displayed on the screen and recorded
on the pictures taken.
• Select [CLOCK SET] to set the current
date and time in advance. (P19)
1 Press [MENU/SET] and then press
2.
2 Press 4 to select the [SETUP]
menu icon [ ] and then press 1
.
3 Press 3/4 to select [WORLD TIME]
and then press 1.
• If you are setting the world time for the first
time, the message [PLEASE SET THE
HOME AREA] appears. If this message
appears, press [MENU/SET] and then set
home area from the screen shown in step
2 in “Setting the home area [HOME]”.
∫ Setting the home area [HOME]
(Perform steps
1, 2 and 3.)
1 Press 4 to select [HOME] and then press
[MENU/SET] to set.
2 Press 2/1 to select your home area and
then press [MENU/SET] to set.
• The current time is displayed on the top
left of the screen and the time difference
from GMT “Greenwich Mean Time” is
displayed on the bottom left of the screen.
• If daylight saving time [ ] is used at the
home area, press 3. Press 3 again to
return to the original time.
• The daylight saving time setting for the
home area does not advance the current
time. Advance the clock setting by one
hour.
MENU
SET
MENU
SET
To Next Page
Loading...
Need help?
General
Weight and Dimensions
