Basic
- 36 -
∫ Changing the settings
Press [MENU/SET] to display the [REC]
mode menu or the [SETUP] menu, and
then select the item to set. (P23)
Items that can be set
• The available settings for the following items
will differ when used with other [REC]
modes.
– [PICT.SIZE]
– [STABILIZER]
– [COL.EFFECT]
• The settings for [CLOCK SET],
[WORLD TIME], [TRAVEL DATE], [BEEP],
and [LANGUAGE] in the intelligent auto
mode [ ] will also be reflected in other
[REC] modes.
• The settings for [CLOCK SET],
[WORLD TIME], [MONITOR/VIEWFINDER],
[TRAVEL DATE], [ZOOM RESUME],
[BEEP], [AF BEEP], [SHUTTER],
[NO.RESET], [DIAL DISPLAY], and
[LANGUAGE] in the [SETUP] menu (P25)
will also be reflected in the intelligent auto
mode [ ].
∫ Other settings in intelligent auto mode
[]
In intelligent auto mode [ ], other settings
are fixed as follows. For more information
about each setting, refer to the page
indicated.
• [AUTO REVIEW] (P25):
[1SEC.]
• [POWER SAVE] (P25):
[5MIN.]
•Self-timer (P55):
10 seconds
• [W.BALANCE] (P93):
[AWB]
• [QUALITY] (P98):
[]
( (0.3M EZ): set to [ ])
•[AF MODE] (P101):
[]
(Set to [ ] when a face cannot be
detected)
• [CONT.AF] (P105):
[ON]
• [AF ASSIST LAMP] (P105):
[ON]
• [METERING MODE] (P100):
[]
• You cannot use the following functions.
– [GUIDE LINE]
– Exposure compensation
– Flash output adjustment
– Auto bracket
– [D.ZOOM]
– Out-of-frame display
• You cannot set the following items.
– [ZOOM RESUME]
–[CONVERSION]
Menu Item
[REC] mode
menu
[ASPECT RATIO] (P97)
[PICT.SIZE] (P98)
[STABILIZER] (P104)
[COL.EFFECT] (P107)
[SETUP]
menu
[CLOCK SET] (P19)
[WORLD TIME] (P90)
[TRAVEL DATE] (P88)
[BEEP] (P27)
[LANGUAGE] (P28)