Panasonic minas a series - Details of Operation (Monitor Mode); Display of I;O signals status

- App. 59 -
Appendixes
Display of I/O signals status
Display the status of control (input) and output signals via the CN I/F connectors. Use this information for checking
the wiring connections.
Active
Inactive
Signal No. (hexadecimal digit 0 to 1F)
• Pressing LEFT button will move the decimal point in blinking.
1) Input/output selection mode
2) Signal selection mode
The lowest No. of input signal
The highest No. of input signal
The lowest No. of output signal
Input signa
Output signal
The highest No. of output signal
(Decimal point placed on the
right side: Signal selection mode)
(Decimal point placed on the left side:
Input/output selection mode)
Pressing UP
button will scroll
downward (in the
arrow direction).