Panasonic minas a series - Parameter Setting; Setting the Parameters

- 47 -
Setting the Parameters
• You can set the Parameters with;
1) the front touch panel or
2) Ayour personal computer with the A-series communication software PANATERM.
<Note>
For the use of PANATERM for parameter handling, see the instruction manual of the soft-
ware.
• Using the front panel
To set a parameter, select the Parameter Setting Mode.
SET button
Switches between the mode (selected with
mode switching button) and the execution
display.
MODE switching button
You can select five MODE options.
Monitor Mode
Parameter Set-up Mode
EEPROM Writing Mode
Auto Gain Tuning Mode
Auxiliary Mode
LED (6 digits)
Use this to change/shift the digit.
Use this to change data/execute the action
of the selected parameters.
Pressing button to increase the value.
Pressing button to decrease the value.
ID MODE
IM SP G
SET
Preparetions and Adjustments