Panasonic NCP500 - Private Network Features-CLIR (Calling Line Identification Restriction); Private Network Features-COLP (Connected Line Identification Presentation)

1.3.53 Private Network Features—CLIR (Calling Line Identification
Restriction)
When
making a call through a private network, you can select whether the called party can see your telephone
number or not.
To show/prevent
On-hook.Off-hook.
PT/SLT/PS/SIP Extn.
Enter 7 1.
Show
Prevent
0
1
OR
17
Enter 0 to show
or 1 to prevent.
C.Tone
• You can change the mode by pressing a preset CLIR button while on-hook.
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Calling Line Identification Restriction (CLIR) button.
1.3.54 Private Network Features—COLP (Connected Line
Identification Presentation)
When receiving a call through a private network, you can present your preprogrammed telephone number to
the calling party.
You
can select the telephone number sent, either the number of the line used or the number assigned to your
extension.
If you select "Public", the calling/called party sees the number of the line used (subscriber’s number).
If you select "Your extension", they see the telephone number assigned on your extension.
To show either the number assigned to the CO line or your extension
Off-hook.
On-hook.
Enter 1 for public or 2
for your extension.
PT/SLT/PS/SIP Extn.
Public
Your extension
OR
1
2
Enter 7 2.
27
C.Tone
110 Operating Manual Document Version 2009-11
1.3.54 Private Network Features—COLP (Connected Line Identification Presentation)