Panasonic NCP500 - Cellular Phone Features

1.6 Cellular Phone Features
1.6.1 Cellular Phone Features
When
you are not at your desk or not in the office and receive a forwarded outside call on your cellular phone,
you can use the following features if enabled through system programming.
–
Transferring to an Extension in the PBX
– Adding Other Parties during a Conversation (Conference)
– Talking to Two Parties Alternately (Call Splitting)
– Paging and then Transferring a Call
• Some features may not be available for cellular phones, depending on the type of CO line
being used.
Transferring to an Extension in the PBX
To transfer
Dial extension number.
During a conversation
Cellular Phone
extension no.
D.Tone
Enter #.
• When transferring a call from an analog CO line, you can talk to the destination party after
dialing an extension number.
• You cannot transfer a call to a DISA floating extension number.
158 Operating Manual Document Version 2009-11
1.6.1 Cellular Phone Features