Panasonic NCP500 - Private Network Features-COLR (Connected Line Identification Restriction); Private Network Features-TIE Line Access

1.3.55 Private Network Features—COLR (Connected Line
Identification Restriction)
When receiving a call through a private network, you can select whether the caller can see your telephone
number or not.
To show/prevent
On-hook.Off-hook.
PT/SLT/PS/SIP Extn.
Show
Prevent
0
1
OR
07
Enter 7 0. Enter 0 to show
or 1 to prevent.
C.Tone
• You can change the mode by pressing a preset COLR button while on-hook.
The COLR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Connected Line Identification Restriction (COLR) button.
1.3.56 Private Network Features—TIE Line Access
You can access extensions connected to other PBXs in a private network.
To call
Off-hook. Talk.
private phone no.
7
Dial extension number or
enter 7 and then dial private phone number.
OR
extension no.
*
*
PT/SLT/PS/SIP Extn.
• * Which type of telephone number must be entered depends on the settings of your PBX.
Document Version 2009-11 Operating Manual 111
1.3.56 Private Network Features—TIE Line Access