Panasonic NCP500 - Using a KX-HGT100 SIP Extension; Operation List

1.5 Using a KX-HGT100 SIP Extension
1.5.1 Operation List
To access PBX features, the access numbers (extension numbers or feature numbers) are required.
KX-HGT100 (firmware version 2.00
or later) users can use the following features:
Note
• To execute an operation, you must press the OK button after pressing all the buttons of the operation.
• If these feature numbers do not work properly with the KX-HGT100, ensure that the firmware of the
KX-HGT100 and the MPR software file version of the PBX are upgraded to their latest versions. For
details, consult your dealer.
Features Refer to
Intercom Call 1.2.1 Making Calls
Intercom Call
Operator Call 1.2.1 Making Calls
Operator Call
Automatic Line Access 1.2.1 Making Calls
Calling an Outside Party
Automatic Line Access
CO Line Group Access 1.2.1 Making Calls
Calling an Outside Party
CO Line Group Access
TIE Line Access 1.3.56 Private Network Features—TIE Line Access
Redial 1.3.58 Redial, Last Number
Speed Dialing—System/Personal 1.3.62 Speed Dialing, System
1.3.61 Speed Dialing, Personal
Personal Speed Dialing—Programming 1.3.61 Speed Dialing, Personal
Doorphone Call 1.3.21 Doorphone Call
External BGM On/Off 2.1.2 External BGM (Background Music)
S-CO Line Access 1.2.1 Making Calls
Calling an Outside Party
S-CO Line Access
Account Code Entry 1.3.2 Account Code Entry
Preventing the telephone number from
showing when making outside calls
1.5.3 Private Network Features—Displaying Your Telephone
Number on the Called Party
’s Telephone
Showing the telephone number when
making outside calls
1.5.3 Private Network Features—Displaying Your Telephone
Number on the Called Party
’s Telephone
Connected Line Identification
Restriction (COLR)
1.3.55 Private Network Features—COLR (Connected Line
Identification Restriction)
Document Version 2009-11 Operating Manual 155
1.5.1 Operation List