Panasonic NCP500 - Page 205

Feature (While dial tone is heard)
Default
(New)
Additional digits/buttons
– Intercom Calls
712
(
)
3 (Busy)/
4 (No Answer)/
5 (Busy/No Answer)
+ voice mail floating extension no.
*3
+ #
1.3.72 Wake-up Call
*4
76
( )
– To set
12H: 1 + extension no. + hour/minute + 0
(AM)/1 (PM) + 0 (once)/1 (daily)
24H: 1 + extension no. + hour/minute + 0
(once)/1 (daily)
– To cancel
0 + extension no.
– To confirm
2 + extension no.
1.3.73 Walking COS
– To make a call or set features from
another extension
47
(
)
your extension no. + extension PIN + phone
no./feature no.
– To make a call or set features through
DISA
1.3.74 Walking Extension
727
(
)
your extension no. + extension PIN
1.3.75 Walking Extension, Enhanced
727
(
)
– To
set an extension status to Service-out
#
– To set an extension status to Service-in
+ your extension no. + extension PIN
1.3.77 Wireless XDP Parallel Mode 48
(
)
– To set
1 + paired wired extension
– To cancel
0
2.1.2 External BGM (Background Music)
*5
35
(
)
– To start
11
– To stop
10
2.1.3 OGM (Outgoing Messages)
*5
36
(
)
– To record
1 + OGM floating extension no.
*6
– To play back
2 + OGM floating extension no.
*6
– To record from an external BGM (MOH)
port
31 + OGM floating extension no.
*6
– To clear
0 + OGM floating extension no.
*6
2.1.4 Private Network Features—NDSS
(Network Direct Station Selection) Monitor
Release
784
(
)
another PBX extension no. + #
Document Version 2009-11 Operating Manual 205
4.2.1 Feature Number Table