Table 2 (Option mode)
<Example> To enter "Ann"
A
2
n n
6
(5 times)
6
(5 times)
FWD/DND
OR
Note
• To erase the character on the cursor, press CLEAR.
• To move the cursor to the left, press .
• To
move the cursor to the right, press
. When entering two or more characters that use the same
button
consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after entering
the first character.
• If the SELECT button is pressed, the characters for each button will be displayed in reverse order.
• To toggle between Table 1 and Table 2 when using a KX-T7600 series DPT, press the leftmost soft
button.
54 Operating Manual Document Version 2009-11
1.3.14 Character Entry
To Next Page
Loading...
