Panasonic NV-SD350 - Page 25

Timer Recording
Weekly Timer Recording
In step 4, select the desired day by pressing V or
DATE -.
Daiiy Timer Recording
For this tirner function, several groups of days can be
selected.
@ Daily recording from Monday to Friday.
Daily recording from Monday to Saturday.
© Daily recording from Sunday to Saturday.
In step 4, select the desired days by pressing ¥ or
DATE —.
Timer Recording from External Signal
Source
If Timer Recording is performed by a unit connected to the
AV1, AV2 Socket or AV3 (Audio/Video Input sockets),
select the At, A2 or A3 for the programme position.
Ai: Through the AV1 socket.
A2: Through the AV2 socket.
A3: Through the AV3 (AUDIO IN/VIDEO IN) sockets on
front panel.
Setting other Programmes in Succession
Repeat steps 2-9.
Checking a Timer Programme
The VCR must be turned on, or the timer recording
indicator “[E” is lit.
®Confirm that the TV is on and the VCR viewing channel
is selected.
Press CHECK. C)
#On
Screen
Display
may
be
On
Screen
Display
distorted
in
the
PDC
recording
standby mode.
~~ 21 25 2
ts pelec:
: CHECK ‘arerat4 1
1] CANCEL Jeane
re |
Cancelling a Timer Programme
@The VCR must be turned on, or the timer recording
indicator °"5]" is lit.
Confirm that the TV is on and the VCA viewing channel
is selecied.
CHECK
1 Press CHECK. Hee
a |
2 Select the desired timer
programme.
3 Press CANCEL. cy
Note:
If a timer recording is not performed to the end (due to
insufficient tape or cancellation by the user), the
programmed timer recording data will be cancelled from
the memory by 4 a.m. the next day.
However, if the Timer Record Function is activated at that
time, the programmed timer recording data will be
cancelled at 4 a.m. the next day.
PDC (Programme Delivery Control)
The Programme Delivery Control (PDC) is a very
convenient system which assures that the TV
Nnranrammesc vai havea nronrammead for timar rarardinn
Bet erg) St er anes uu Se vwwyY EMAC EPP ee ee ee dati |
will be recorded exactly from beginning to end, even if the
actual broadcasting time differs from the scheduled time
due to delayed start or extension of the programme
duration. Also, if a programme is interrupted and for
example, some special news item is inserted. the
recording will also be interrupted automatically and
resumed when the programme continues.
®in the case of PDC recording. use the correct time (PDC
time) for recording the TV programmes. PDC recording
is not performed when the time (PDC time) is incorrect,
even if only by one minute, i.e. start time as published in
TV programme guide in newspaper, magazine, teletext,
etc.
@Since PDC signals are received when a recording is
programmed using PDC, the power of the unit's tuner
section is turned on and the programmed broadcasting is
received. When a multiple number of programmes have
been programmed for timer recording, all of the
broadcasts concerned will be received in sequence.
®l|f the actual broadcasting times of timer recordings
overlap (regardless of whether they are PDC-
controlled), the recording that starts first always has
prioriiy, and the recording of ihe iater programme wili
start only after the first timer recording has finished.
#When the PDC signal drops out because the broadcast
signal is weak. or when a broadcasting station does not
transmit a regular PDC signal, the timer recording will be
performed in the normal mode {without PDC) even if it
was programmed for PDC.
in this case. even if the timer recording is performed,
whatever has been programmed will not be cancelled at
that particular time but at 4 a.m. on the following day.
®PDC recording is also possible during timer recording
from AV2 socket.
Advanced Operations
{25)