Panasonic NV-SD350 - Page 45

Before Requesting Service
7
-VGR will not operate correctly
: t
CAUSE | REMEDY | CHECKED |
VCR display is not Mains tead is not connected. | Reconnect mains lead to VCR. :
| illuminated.
‘ VCR Display setting is OFF. : Set VCR Display to ON or DIMMED. See page 37.
! VCR display is | VCR is in timer mode. Press TIMER REC to operate VCR manually. |
' illuminated but VCR
will not operate. Disconnect mains lead and wait for 1 minute.
Reconnect mains supply and check functions.
| Safety devices are operating.
' CHECKED
1 i a ———
' Picture noisy or not Tracking is not correct. : Adjust the tracking. See page 19.
~ in colour.
_ Horizontalbarsor j| TV setis not tuned to VCR. Operate RF OFF/TEST SIGNAL on VCR and check |
i jines run down the TV tuning. See page 10.
screen. aka
Video heads are clogged or Consult your dealer for further advice.
worn. Head cleaning by service agent is not covered by
warranty.
pep Hints
(45)