－ 9 －
Hardware configuration
To use this software, the following devices are required.
Establish a system, referring to the instruction manuals
enclosed with the devices.
The software may not operate normally in operating environment
not conforming to the recommended specifications.
□ Personal computer
・CPU : Pentium 100MHz or more
・Memory : 16MB or more (32MB recommended)
・Hard disk capacity (vacancy of 25MB or more recommended)
・OS : Windows
®
98, Windows
®
Me, Windows
®
2000, Windows
®
XP (US version)
・Communication speed of serial communication port : 2400bps or more
(The software may not operate normally using USB-to-Serial adapter.)
□ Display
・Resolution : 640*480 (VGA) or more (desirably 1024*768)
・Number of colors : 256colors or more
□ CD-ROM drive
CD-ROM drive operable on the above-mentioned personal computer
■Notes:
・Even when there are terminals, such as COM1 and COM2, they may be
unavailable for PANATERM
®
in the following cases.
When devices, such as a built-in modem, use the communication
ports (See the instruction manual for personal computer.)
When the port amplifier software has not been set correctly
(Click the “start” button, “Set”, “Control panel”, “System”,
“Device manager” and “Port” successively, and the screen on which
the setting can be checked will appear. For details, see the
instruction manual for personal computer.)
・If you use hardware not listed, you should check for normal
operation.
To Next Page
Loading...
