－ 75 －
Supplement
＜Printer setting＞
Please change the printer setting by using the control
of Windows.
®
Use the printer under the standard setting conditions specified
by the printer manufacturer.
If the following printer is used, some tables and charts cannot
be printed under the standard printer amplifier setting
conditions. Before using the printer, change the amplifier
setting.
Canon LBP-2030
(1) Select “Main” from the property menu of LBP-2030.
○ “Print object” → Set to “Image 3”.
When the following printer is used, part of data will not be
printed.
The printer model and unprintable data are shown below.
Canon LBP-220
When frequency characteristics are printed, the cutoff and the
cursor cannot be printed.
To Next Page
Loading...
