－ 19 －
6.OPERATION
Determining whether to communicate with amplifier
After PANATERM
®
is started, a dialog will appear to determine
whether to communicate with the amplifier. Also when “File”,
and “Communication with the
amplifier” are selected
in the parent window of
PANATERM
®
, or when
“Communication with the
amplifier” on the window
menu is clicked, the
dialog will be displayed.
Determining whether to communicate with amplifier
“Communicate with the amplifier”
Communication with the amplifier directly connected Through
RS-232C will be provided. As soon as parameters received
from the amplifier are edited or set, the changed parameters
will be introduced to the amplifier. The model of the
connected amplifier is automatically identified.
“Communicate with the amplifier (via RS-485)”
Communication with the amplifier connected through RS-485
will be provided through the amplifier whose axis address (ID)
is 0. As soon as parameters received from the amplifier are
edited or set, the changed parameters will be introduced to
the pertinent amplifier. The model of the connected amplifier
is automatically identified.
“No communication”
Parameters saved in files can be freely edited irrespective
of connection of amplifiers.
The model of the corresponding amplifier will be selected from
the menu.
To Next Page
Loading...
