－ 24 －
6.OPERATION
Parameters
The parameter window is designed for operations related to
parameters.
You can check, rewrite and save the amplifier parameters.
It is possible to extract only frequently used parameters,
and edit and set them.
The parameter setting window shows parameter names and
settings.
The parameter setting can be changed freely within the
setting range.
■Notes:
・Some parameters greatly affect the amplifier operation.
Take utmost care when changing them.
Opening the parameter window
1 Start up PANATERM
®
.
(For details, see Section 5 “Startup”.)
2 The window menu will appear on the PANATERM
®
screen.
3 Click “Parameter” in the window menu.
4 The window for selecting parameters be
loaded will be displayed.
5 Select and click the source of parameters.
“Read-out from the amplifier”
The computer will communicate with the connected amplifier,
and load the parameters set on the amplifier. In this mode,
as soon as the parameter values are changed, the changed
values are introduced to the amplifier.
To Next Page
Loading...
