－ 58 －
6.OPERATION
Positioning Parameter
(Available with MINAS-A4P series)
MINAS-A4P series allow positioning parameter manipulation
(checking, rewriting and saving of amplifier positioning
parameters) on the positioning parameter window. The
positioning parameter names and settings are displayed on the
positioning parameter setup window. Settings can be made freely
in the parameters within the ranges.
■Notes:
・Special care should be taken because some positioning parameters
significantly affect the amplifier operations.
Opening the Positioning Parameter Window
1 Start up PANATERM
®
.
(For details, see Section 5 “Startup” in this manual)
2 The window menu will appear on the PANATERM
®
screen.
3 Click “Positioning parameter” on
the window menu.
4 The window for selecting parameters
to be read will be displayed.
To Next Page
Loading...
