－ 15 －
Procedure for terminating menu
When a menu contains “End”, click the mouse left button on “End”, and the
menu will be terminated. Or click the in the upper right-hand corner of
the window to terminate the menu.
Inputting value
To input a value, use the numeric keys on the keyboard. To redo input,
erase the input value using the “BS” key. Press the “ESC” key, and the
value will return to the initial value.
When there are incrementing and decrementing buttons (▲ and ▼) near the
numeric input field, the value can be changed by clicking the mouse on
these buttons.
Numeric data for changing parameters are displayed in decimal. The data
can be input also in binary and in hexadecimal. Alphabetic characters in
hexadecimal value can be input in uppercase or lowercase.
An input value can be cancelled by pressing the “ESC” key.
Filing
When the file must be specified to load or save parameters, a common file
dialog is displayed.
“Save in” : Specify the file location (Drive and directory). Click
the ▼ mark, and the folder list will appear. Select the
pertinent folder from the list.
“File name” : Specify the file name.
“Save as type” : The file type is displayed.
To Next Page
Loading...
