EasyManua.ls Logo

Panasonic PANATERM Ver. 3.7 - Setup Procedure

Panasonic PANATERM Ver. 3.7
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 11 -
Communication cable
An optional cable is available to connect the connector (SER)
on the amplifier front panel and the connector for RS-232C on
the personal computer.
○Between personal computer and amplifier
DV0P1960(D-SUB9-pin)(cable length : 2000[mm])
Also an optional cable is available to connect the connector
(NET) on the amplifier front panel and the connector (SER) of
another amplifier for establishing communication between the
amplifiers through RS-485.
○Between amplifiers (Available only for MINAS-A4,A3,A series)
DV0P1970(cable length : 200[mm])
DV0P1971(cable length : 500[mm])
DV0P1972(cable length : 1000[mm])
■Notes:
・The connection cable for RS-232C cannot be used for other devices.

Related product manuals