Panasonic PANATERM Ver. 3.7 - Operation and Control; Amplifier Communication Setup

－ 18 －
5.STARTUP AND TERMINATION
Startup
1 Turn on the power to the personal computer to start Windows
®
.
2 Turn on the power to the amplifier.
3 Click “Start” of Windows
®
.
(For “Start”, see the manual for Windows
®
.)
4 Select “PANATERM” from the “Program” menu, and click it.
(Or start Explorer, and double-click the execution file of
PANATERM
®
(ex. C:/Program Files/PANATERM/PANATERM.exe).)
5 The opening splash will appear. The opening splash will be
displayed for 2 seconds, and automatically change to the
PANATERM
®
screen.
Termination
1 To terminate PANATERM
®
, click “Exit of Panaterm” in the “File”
menu on the PANATERM
®
screen.
(Or click at the right end on the title bar on the PANATERM
®
screen, and PANATERM
®
will be terminated in the same manner.)
2 A message will be displayed to confirm your intention of
terminating PANATERM
®
.
To terminate, click “Yes”. Not to terminate, click “No”.
■Notes:
・Note that all information will be lost if you terminate the
program without saving set information and obtained data.