－ 74 －
7.TROUBLHSOOTING
Failure in axis setting
The number of connected amplifiers is different from the number of
amplifiers found by the search function.
→ Make sure that the ID (RSW) of the amplifier connected to the
personal computer is 0 and the IDs (RSWs) of other amplifiers
are 1 to F and there is no duplicated ID. Before switching any
amplifier ID (RSW), disconnect power from all amplifiers.
→ Check that the communication cable is not loose, the cable is
not broken, the proper cable is used and the cable is connected.
To Next Page
Loading...
