Panasonic PANATERM Ver. 3.7 - Startup and Termination; Connection and Startup Procedures

－ 16 －
4.BASIC OPERATION
■Notes:
・Files to be handled by PANATERM
®
will be given extensions to identify
them. Do not change the extensions. Files with changed extensions
may not be handled by the program.
 Parameter file : File name.prm
 Parameter extraction status file : File name.prs
 Waveform graphic measurement condition file : File name.wgc
 Waveform graphic measurement result file : File name.wgd
 Parameter and waveform graphic measurement result file :
File name.wgp
 Frequency characteristic measurement condition file :
File name.fcc
 Frequency characteristic measurement result file :
File name.fcd
 Parameter and frequency characteristic measurement
result file : File name.fcp
 Frequency characteristic file : File name.idt
 Positioning parameter file : File name.ncp
・Do not delete files related to PANATERM
®
. It can disable PANATERM
®
.
(If not specified, PANATERM
®
will be installed in C:/Program Files
/PANATERM/ Do not delete any files in this directory. Particularly
the C:/Program Files/PANATERM/ini directory contains important
files for controlling the operation of PANATERM
®
.)
Tool tip text
Place the mouse pointer on a displayed item, the explanation of
the item will appear.