Panasonic PANATERM Ver. 3.7 - Basic Operation and Interface; Key Notation and Menu Navigation

－ 13 －
6 To start the setup procedure, click “OK”.
7 Execute operation according to the guidance given by the
setup program. Follow the instructions.
8 Click , and installation of PANATERM
®
will be started.
Click “Exit Setup”, and PANATERM
®
will not be installed.
If necessary, click “Change directory”, and specify the
directory and the drive in which PANATERM
®
will
be installed. (If they are not specified, PANATERM
®
will be
installed in the “C: /Program Files /PANATERM” directory.)
9 When the message “Setup completed” appears, click “OK”.
Then, the setup procedure is finished.
10 Close all applications, and restart Windows®, (If indows®
is not restarted, PANATERM
®
may not be added to the program
menu.)
※If any error occurs during setup, an error message is
displayed. Remove the cause of the error, referring to Section
“Failure in setup”(page 71).