Panasonic PANATERM Ver. 3.7 - Page 32

－ 31 －
Editing the extracted parameters
Click the “Extracted parameter” tab.
Edit and set values in the same manner as when setting and
editing all of parameters.
Saving the extracted state of parameter
Click “File” on the menu bar on the PANATERM
®
screen, and
click
“Save” and “Extraction status”. The file name is ***.prs.
Reading the extracted state of parameter
Click “File” on the menu bar on the PANATERM
®
screen, and
click
“Reading” and “Extraction status”. The file name is ***.prs.