－ 40 －
6.OPERATION
Full closed
Click the “Full closed” tab in the monitor window.
<Items to be displayed by selecting “Full closed”>
“Command pulse check-sum”:
Indicates the sum of command pulses generated
after the amplifier control power is turned
on.
※The sign and the unit are different according to the amplifer.
“External scale Feed-back pulse check-sum”:
Indicates the sum of external scale feedback
pulses. The external scale feedback pulse sum is
the sum of external scale feedback pulses that
the amplifier has received since the control
power was turned on.
“External scale error”:
Indicates the position error of the external scale.
■Notes:
・This function is effective only when the control mode has been set to
the full close, hybrid or external encoder control mode.
To Next Page
Loading...
