－ 51 －
Saving and reading results of waveform
graphic measurement and parameters
It is possible to save the measurement results and the parameter
settings used for the measurement in a file, and to refer to
them later. The waveform graphic measurement result file name is
***.wgp.
Saving the results of waveform graphic measurement and parameters
1 Select “File” on the PANATERM
®
menu bar, and click “Save” and
“Measuring result and parameter”.
2 Specify the file name to be saved in the file dialog window.
3 Click “Save”.
Reading the results of waveform graphic measurement and parameters
1 Select “File” on the PANATERM
®
menu bar, and click “Reading”
and “Measuring result and parameter”.
2 Specify the file name to be loaded in the file dialog window.
3 Click “OK”.
To Next Page
Loading...
