－ 56 －
6.OPERATION
(3) Graph options: Setting item related to display and
operation of graph.
“Smoothing”: Set the degree of smoothing.
“Cursor” Switches to the cursor display or non-display mode.
The cursor will move to a position on which you
click the mouse button.
“Cutoff frequency” Switches to the cutoff frequency display or non-
display mode.
(4) Slider for horizontal axis, (5) Slider for vertical axis
The position and magnification of the horizontal or vertical
axis the bode chart displayed in Item (6) are changed.
(6) Baud chart
Measured frequency characteristic data is displayed
in the from of a bode chart.
(7) Scroll bar for bode chart display area
The display area of the bode chart (6) is scrolled.
Measuring frequency characteristics
1 Open the frequency characteristic window, or click “Measure”
in the frequency characteristic window, and the measurement
window will open.
2 Carefully read the cautions given in the caution area (1).
3 Specify the measuring conditions in the field (2).
4 Click “Execute the measurement” in the operation button area
(3), and frequency measurement will be started.
(1) Caution area
(2) Measuring condition input place
(3) Operation button
To Next Page
Loading...
