－ 63 －
■Notes:
・For details of the function of each positioning parameter, see the
instruction manual for your amplifier.
・Even if positioning parameters have been transmitted to the
amplifier, they return to the value before change when the
amplifier is turned off because they are not written in the EEPROM.
When positioning parameters have been written in the EEPROM, a
change list of positioning parameters is displayed. Check it
carefully.
・While positioning parameters are written in the EEPROM, do not turn
off the amplifier and personal computer. If ignored, the data may
be lost.
・After positioning parameters have been changed, some of them do not
become effective unless they are written in the EEPROM and the
amplifier is reset. (At entering parameter value, a warning message
is displayed. For these parameters, see the instruction manual for
your amplifier.)
To Next Page
Loading...
