Panasonic PT-AE7000U PT-AT5000E PT-AE700EA PT-AE7000EH

5. 3. 4. Air filter unit maintenance
5. 3. 5. Cleaning procedure for Air filter unit
1. Using a Phillips screwdriver to turn the fixing screw of the air filter cover until loose and remove the cover.
2. Hold the grips on the air filter unit, and remove the unit towards arrow.
3. Vacuum the dirt and dust, from the air filter unit.
* Do not wash the air filter unit.
5. 3. 6. Replacement procedure for Air filter kit
1. Press the protrusions of air filter unit removed from the projector in the direction of the arrow and remove
the air filter frame.
2. Replace the Air filter kit (air filter/electrostatic filter).
* Ensure you attach the electrostatic filter and air filter in the correct order.
2. Confirmation message is displayed on the screen, and at the same time <TEMP> illuminates red.
The power is cut off automatically after a while.
1. If too much dust accumulates in the air filter the internal temperature of the projector cannot be maintained
at the normal level.
A
ir filter cover fixing screws
A
ir filter cover
Grips
A
ir filter unit
A
ir filter frame
Protrusions
A
ir filter frame
A
ir filter case
Electrostatic filter (white)
A
ir filter (black)
INF - 14