2.10. Remonal of M2-P.C.Board
1. Remove the Top Cover according to the section 2.2 "Removal of Top Cover".
2. Unscrew the 1 screw and remove the V-P.C.Board.
3. Unscrew the 3 screws and remove the Front cover.
4. While pressing to shut each hook of the Adjuster leg, remove the Adjuster leg (lens side).
5. Remove the Bottom cover (R).
6. Unscrew the 1 screw and remove the M1-P.C.Board.
V-P.C.Board
Front cove
Bottom cover (R)
djuster leg
DIS-10
To Next Page
Loading...
