(4) Slide out the X-P.C.Board to disconnect it from the connectors on the
J-P.C.Board.
(5) Instead of the X-P.C.Board, connect the extension board into the
connector on the J-P.C.Board.
(6) Connect the X-P.C.Board to the connector on the extension board.
7.4. Replacement of the lithium battery on the R-P.C.Board
If the lithium battery will be empty, replace it with a new one (CR2032 or equivalent).
Cautions
·
Explosion may occur if replacing the battery with an incorrect one.
·
Dispose of used batteries according to the instructions.
22
PT-D7700U / PT-D7700E
To Next Page
Loading...
