Panasonic PT-MZ680

Chapter 5 Operations — Web control function
ENGLISH - 151
6 [LIGHT POWER]
Displays the setting status of [LIGHT POWER].
7 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
8 [SERIAL NUMBER]
Displays the serial number of the projector.
9 [OSD]
Displays the status of the on-screen display.
10 [VOLUME]
Display the volume status.
11 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
12 [REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
13 [INPUT]
Displays the status of the selected input.
14 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
15 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the projector.
16 [LIGHT TEMPERATURE1]
Displays the temperature status of light source 1.
17 [LIGHT TEMPERATURE2]
(Only for PT-MZ880 and PT-MZ780)
Displays the temperature status of light source 2.
18 [LIGHT]
Displays the lighting status and runtime of the light source.
19 [SELF TEST]
Displays the self-diagnosis information.
20 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display eld of the
[Projector status]
screen, click it to display the content of the error/warning.
f
The projector may go into the standby status to protect the projector depending on the contents of the error.
1
2
1 Display of error information
Displays the alphanumeric symbols and content of errors/
warnings that occur.
For the details of the display content, refer to “[SELF TEST]
display” (
x
page 180).
2 Error code
[Network status] page
Click [Status]
→
[Network status].
The current network setting status is displayed.
[Access error log] page
Click [Status]
→
[Access error log].
The error log on the web server is displayed such as access to the pages that do not exist or access with
unauthorized user names or passwords.