Panasonic PT-MZ680

Chapter 5 Operations — Web control function
152 - ENGLISH
[Mail error log] page
Click [Status]
→
[Mail error log].
E-mail error log is displayed if periodic E-mail sending has failed.
Note
f
[Access error log] and [Mail error log] display the recent few thousand accesses/requests. All information may not be displayed when many
accesses/requests are made at once.
f
Logs in [Access error log] and [Mail error log] are deleted from the oldest when exceeding a certain amount.
f
Check [Access error log] and [Mail error log] periodically.
[Basic control] page
Click [Projector control]
→
[Basic control].
1
2
3
4
6
5
1 [POWER]
Turns off/on the power.
2 [SHUTTER]
Switches the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
3 [OSD]
Switches on (display)/off (hide) the on-screen display function.
4 [SYSTEM]
Switches the system method.
5 On-screen display of the projector
Displays the same items as shown on the on-screen display of
the projector. You can check or change the settings of the menus.
It is displayed even if the on-screen display function is set to off
(hide).
6 [INPUT SELECT]
Switches the input signal.