Panasonic PT-RQ32K

2 - ENGLISH
Contents
Contents
Read this rst! 5
Chapter 1 Preparation
Precautions for use 17
Cautions when transporting
17
Cautions when installing
17
Cautions when setting up the projector
18
Security
21
QUAD PIXEL DRIVE
22
DIGITAL LINK
22
Art-Net
22
Early Warning Software
22
Storing
22
Disposal
22
Cautions on use
22
Accessories
24
Optional accessories
26
About your projector
27
Remote control
27
Projector body
28
Names and functions of the Interface Board
(optional)
32
Preparing the remote control
34
Inserting and removing the batteries
34
When using the multiple projectors
34
Connecting the remote control to the projector
with a cable
35
Chapter 2 Getting Started
Setting up 37
Usable outlet
37
Installation mode
37
Interface Board (optional)
38
Projected image and throw distance
39
Adjusting adjustable feet
47
Attaching/removing the projection lens
(optional)
48
Attaching the projection lens
48
Removing the projection lens
49
Connecting
51
Before connecting
51
Connecting example: AV equipment
51
Connecting example: Computers
54
Connecting example using DIGITAL LINK
55
Connecting example when using the
contrast synchronization function/shutter
synchronization function
56
Chapter 3 Basic Operations
Switching on/off the projector 59
Connecting the power cord
59
Power indicator
60
Switching on the projector
61
When the initial setting screen is displayed
62
Making adjustments and selections
68
Switching off the projector
69
Projecting
70
Selecting the input signal.
70
Adjusting the focus, zoom, and lens shift
72
Adjusting the focus when the Fixed-focus Lens
(Model No.: ET-D75LE95, ET-D75LE90) is
used
73
Setting the lens type
74
Executing the lens calibration
74
Moving the projection lens to the home position
76
Lens shift range
77
Adjusting the lens mounter when the focus is
unbalanced
78
Operating with the remote control
80
Using the shutter function
80
Using the on-screen display function
80
Using the automatic setup function
81
Switching the image aspect ratio
81
Using the function button
81
Displaying internal test pattern
82
Using the status function
82
Using the AC voltage monitor function
83
Setting ID number of the remote control
83
Chapter 4 Settings
Menu navigation 85
Navigating through the menu
85
Main menu
86
Sub-menu
87