Panasonic PT-RQ32K

Chapter 6 Maintenance — Maintenance/replacement
ENGLISH - 219
Attaching the air lter unit
Long life filter cover
Air filter unit
Guide on the long life filter cover (e)
Grip on the air filter unit (a)
Grip on the air filter unit (b)
Guide on the long life filter cover (f)
Air filter unit
Fig. 3Fig. 2Fig. 1
Cross section
1) Attach the two air filter units to the long life filter cover. (Fig. 1)
f Attach the two air lter units to the long life lter cover. The method to attach the two air lter units is the
same.
f Align the position so that the grips on the air lter unit (a) and (b) will be outside the guides on the long life
lter cover (e) and (f), and push in the direction of the arrow by holding the outer frame of the air lter unit.
(Fig. 2)
f When the two air lter units are attached (Fig. 3), proceed to “Attaching the long life lter cover”
(x page 219) next.
Note
f Make sure that the air lter unit is properly attached before using the projector. If it is not attached, the projector will suck in dirt and dust
causing a malfunction.
Attaching the long life lter cover
Fig. 2Fig. 1
Long life filter cover fixing screws
1) Attach the long life filter cover to the long life filter mount clasp. (Fig. 1)
f Attach the long life lter cover (with the two air lter units attached) to the long life lter mount clasp on the
projector body.
f The long life lter cover has no difference between top and bottom.
2) Secure the long life filter cover. (Fig. 2)
f Securely x with the two long life lter cover xing screws (knurled head screws) removed in Step 2) in
“Removing the air lter unit” (x page 217).
f When the long life lter cover is secured, proceed to “Resetting the lter counter” (x page 220) next.