Panasonic PT-RQ32K

Chapter 7 Appendix — Technical information
230 - ENGLISH
Control details
Art-Net channel setting
[1] [2] [3] [USER]
RASTER PATTERN ― ― ―
l
LENS H SHIFT MSB ― ― ―
l
*1
LENS H SHIFT LSB ― ― ―
l
*1
LENS V SHIFT MSB ― ― ―
l
*1
LENS V SHIFT LSB ― ― ―
l
*1
LENS FOCUS MSB ― ―
l l
*1
LENS FOCUS LSB ― ―
l l
*1
LENS ZOOM MSB ― ―
l l
*1
LENS ZOOM LSB ― ―
l l
*1
ENABLE/DISABLE
l l l l
*1 These items can be controlled in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection lens with
the stepping motor is attached.
Control details
r LIGHT OUTPUT
This can be set in 256 steps between 100 % and 0 %.
Performance Parameter Default value
100 % 0
0… …
0 % 255
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to [1])
Performance Parameter Default value
No operation 0-47
0
SDI1 48-55
SDI2 56-63
No operation 64-255
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to anything other than [1])
Performance Parameter Default value
No operation 0-39
0
DIGITAL LINK 40-47
SDI1 48-55
SDI2 56-63
SDI3 64-71
SDI4 72-79
SLOT1-1
*1
80-87
SLOT1-2
*2
88-95
SLOT2-3
*3
96-103
SLOT2-4
*4
104-111
No operation 112-119
MULTI DISPLAY OFF 120-127
Execute MULTI DISPLAY, USER1 128-135
Execute MULTI DISPLAY, USER2 136-143
Execute MULTI DISPLAY, USER3 144-151
No operation 152-255
*1 Input 1 of the Interface Board installed in <SLOT 1>
*2 Input 2 of the Interface Board installed in <SLOT 1>
*3 Input 3 of the Interface Board installed in <SLOT 2>
*4 Input 4 of the Interface Board installed in <SLOT 2>