R
Ricardo MartinezAug 25, 2025
Why is my Panasonic PT-RZ120 remote control not responding?
- Ddebra67Aug 26, 2025
If the remote control for your Panasonic Projector isn't responding, first ensure the batteries aren't depleted and are inserted with the correct polarity. Check for obstructions between the remote and the projector's receiver, and make sure you're within the remote's effective range. Also, verify that other light sources aren't interfering with the projection. Confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] isn't set to [DISABLE], and that the terminal isn't being used for contact control. Finally, ensure the ID number setting operation is correct.












