Panasonic PT-RZ990

Chapter 4 Settings — [DISPLAY OPTION] menu
110 - ENGLISH
Adjusting position automatically
1) Press
as
to select [AUTO SETUP].
2) Press the <ENTER> button.
f
The
[AUTO SETUP]
screen is displayed.
3) Press
as
to select [POSITION ADJUST].
4) Press
qw
to switch the item.
[ON]
Adjust the screen position and size when automatic setup is executed.
[OFF]
Does not perform automatic adjustment.
Adjusting signal level automatically
1) Press
as
to select [AUTO SETUP].
2) Press the <ENTER> button.
f
The
[AUTO SETUP]
screen is displayed.
3) Press
as
to select [SIGNAL LEVEL ADJUST].
4) Press
qw
to switch the item.
[OFF]
Does not perform automatic adjustment.
[ON]
Adjusts black level (the [PICTURE] menu
→
[BRIGHTNESS]) and white level (the [PICTURE] menu
→
[CONTRAST]) when automatic setup is executed.
Note
f
[SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[BACKUP INPUT SETTING]
Set the backup function that switches the signal to the backup input signal as seamless as possible when input
signal is disrupted.
Using the SDI input and HDMI input or DVI-D input
1) Press
as
to select [BACKUP INPUT SETTING].
2) Press the <ENTER> button.
f
The
[BACKUP INPUT SETTING]
screen is displayed.
3) Press
as
to select [BACKUP INPUT MODE].
4) Press the <ENTER> button.
f
The
[BACKUP INPUT MODE]
screen is displayed.
5) Press
as
to select the combination of the input and press the <ENTER> button.
Primary input Secondary input Details
[OFF] Disables the backup function.
[DVI-D] [HDMI]
Enables the backup function.[SDI] [DVI-D]
[SDI] [HDMI]
6) Press the <MENU> button.
f
The
[BACKUP INPUT SETTING]
screen is displayed.
7) Press
as
to select [AUTOMATIC SWITCHING].
f
[AUTOMATIC SWITCHING] cannot be selected when [BACKUP INPUT MODE] is set to [OFF].