Panasonic PT-VW535N

[NETWORK/USB] menu
On the menu screen, select [NETWORK/USB] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
Æ page 53) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
Conrmation of the network information
When connecting the "Wireless Manager ME6.2", the dedicated application of iPad/iPhone/iPod touch/Android, or the
Miracast-certied device to a projector, the information such as the Network number of Wireless LAN, Projector name and
Network ID are required. You can conrm the information in the [STATUS] in the [NETWORK/USB] menu. (
Æ
page 97)
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO] Switches the communication method automatically to DIGITAL LINK or Ethernet.
[DIGITAL LINK] Fixes the communication method to DIGITAL LINK.
[ETHERNET] Fixes the communication method to Ethernet.
Possible communication modes
Setting
Communication possible
Image transmission Ethernet RS-232C
[AUTO]
For DIGITAL LINK
l l l
For Ethernet
―
l
―
[DIGITAL LINK]
l l l
[ETHERNET]
―
l
―
l: Communication possible
―: Communication not possible
[DIGITAL LINK SETUP]
Set the communication method of DIGITAL LINK or Ethernet.
When the projector is connected directly via Ethernet
1) Press as to select [DIGITAL LINK SETUP].
2) Press the <ENTER> button.
f The [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(ETHERNET)].
4) Press qw to switch the communication method.
f The items will switch each time you press the button.
88 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu