RQT5822
22
POWER
Í/I
SEQUENTIAL
MODE
REPEAT
MODE
PLAY
MODE
1234567890S10
CANCEL
DISC
EXCHANGE
DISC
SKIP
CINEMA
OPEN/CLOSE
<
D
I
S
C
1
D
I
S
C
5
D
I
S
C
2
D
I
S
C
4
D
I
S
C
3
1∫ ;
DISC
SELECTOR
∫
V.S.S.
ADVANCED
SURROUND
DISC 1
-
5
DIRECT TUNING//
DISC
DISC ENTER/
DECK 1/2
REPEAT
MODE
SEQUENTIAL
MODE
A-B
REPEAT
ENTER
TV VCR DVD
TUNER/BAND
TAPE CD
AUDIO
TOP MENU
RECEIVER
MENU
SKIP
PLAYPAUSE
SOUND MODE
CHANNEL VOLUME
HELP
MUTING
SUBWOOFER
STOP
RETURNDISPLAY
TV/VIDEO
TV VOL
123
DVD 6CH
456
DIGITAL
789
SFC
0
/
ENTER
DELAY
PLAY MODE ACTION CANCEL
LEVEL
SUBTITLE AUDIO ANGLE
DISC SKIP
DISC INFO
DVD
DIMMER TEST
SLOW /SEARCH
∫
A
DIRECT TUNING/
DISC
123
456
789
0
/
ENTER
2
1
D
I
S
C
1
D
I
S
C
5
D
I
S
C
2
D
I
S
C
4
D
I
S
C
3
1234567890S10
B
C
SPEAKERS
SOUND MODE
LR
DIGITAL
SPEAKERS
SOUND MODE
SURROUND
SURROUND
LCR
LFE RSLS
DIGITAL
DIRECT TUNING/
DISC
123
45
S10
Playing discs
[A] Starting play from a selected title or track
1. Press [DISC 1]–[DISC 5] on the changer, or press
[DIRECTTUNING/DISC] and [1]–[5] on the remote control, to
select the disc.
2. Press the numbered buttons to select the track.
To select a 2-digit number
Example: To select track 23, press [L] or [L/ENTER],then [2]
and [3].
Play starts from the selected title/track.
Note
³This works only when stopped with some discs.
³This may not work with some discs.
If a title menu appears on the TV (á page 26)
Use the cursor buttons to highlight a title and press [ENTER] on the
remote control.
or
Use the numbered buttons to select a title.
Playing CD-R and CD-RW
The changer can play CD-DA (digital audio) and video CD format au-
dio CD-R and CD-RW that have been finalized
¤
upon completion of
recording of the recording.
¤
Finalizing is a process that enables CD-R/RW players to play audio
CD-R and CD-RW.
Playing MP3 onto CD-R and CD-RW
³Not compatible with multi-session recordings
If you record MP3 onto CD-R/CD-RW over a number of sessions,
this unit can play only the recordings made in the first session.
³Recordings will not necessarily be played in the order you recorded
them. The recordings will be recordered according to their
titles: numbers in numerical order first, upper case in alphabetical
order next, and lower case in alphabetical order last.
³If you play an MP3 track that includes still picture data, it will take
some time before the music starts playing and the elapsed time will
not be displayed during this time. Even after the track starts, the cor-
rect play time will not be displayed.
Note
³The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [º] when you finish to preserve the
changer’s motor and your television screen.
³Volume may be lower when playing DVDs than when playing other
discs or during television broadcasts.
If you turn the volume up, reduce it again before playing other sourc-
es so that a sudden increase in output does not occur.
For your reference
[B] The signal format indicators
The following indicators light on the receiver’s display to show the
source you are playing.
ëDIGITAL
Dolby Digital Sources
DTS
DTS Sources
ëPRO LOGIC
Analog sources in SURROUND mode
Digital sources with PCM signals in SURROUND mode
Dolby Digital sources that contain Dolby Pro Logic in SURROUND
mode
[C] The program format indicators
The program format indicators on the receiver light up to indicate the
channels contained in the digital input signal. They do not light when
input is analog.
L: Front channel (left)
C: Center channel
R: Front channel (right)
LS: Surround channel (left)
RS: Surround channel (right)
S: If the surround channel is monaural.
LFE (Low Frequency Effect): Deep-bass effect.
or
or
Numbered buttons
3, 4, 2, 1/
ENTER
Numbered
buttons
To Next Page
Loading...
