RQT5822
34
A
B
INPUT SELECTOR
B
TAPE MONITOR
D
E
TAPE MONITOR
MUTING
DIRECT TUNING/
DISC
DISC ENTER/
DECK 1/2
REPEAT
MODE
SEQUENTIAL
MODE
A-B
REPEAT
SOUND MODE
CHANNEL VOLUME
HELP
MUTING
SUBWOOFER
TV/VIDEO
TV VOL
123
DVD 6CH
456
DIGITAL
789
SFC
0
/
ENTER
DELAY
PLAY MODE ACTION CANCEL
LEVEL
SUBTITLE AUDIO ANGLE
DISC SKIP
DISC INFO
DVD
DIMMER TEST
TAPE
MONITOR
C
MUTING
DIMMER
1
1
DIMMER
TAPE
MONITOR
Making a recording
Note
You cannot record a source connected through a digital terminal.
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analog terminals (á pages 13 and 16) and
“ANALOG” input is selected (á pages 20 and 25).
»
A
Recording on a tape deck or VCR
You can record to a tape deck connected to TAPE REC (OUT) or to a
VCR connected to VCR OUT.
See the recording unit’s operating instructions for details on how to
prepare it for recording.
When recording with a tape deck, you can record any source except
TAPE.
When recording with a VCR, you can record any source except TAPE
or VCR.
1 Turn [INPUT SELECTOR] to select the
source to be recorded.
2 Begin recording.
Follow your recording unit’s operating instructions.
3 Begin the source to be recorded.
Follow your equipment’s operating instructions.
To monitor sound being recorded onto a tape
»
B
deck
It is possible to check the sound being recorded if your tape deck is a
3-head system.
Press [TAPE MONITOR] on the receiver
and set the monitor button on the tape
deck to “TAPE”.
Press [TAPE MONITOR] once again to turn it off.
Other functions
»
C
Using the TAPE MONITOR
Use the tape monitor if you have connected a graphic equalizer to the
TAPE terminals.
Press [TAPE MONITOR].
The “TAPE MONITOR” indicator lights and the tape monitor comes
on.
Sources other than TAPE can still be selected with [INPUT
SELECTOR] while the “TAPE MONITOR” indicator is on.
Press [TAPE MONITOR] again to turn the tape monitor off.
(á See above for details on how to use the tape monitor during
recording.)
Note
³The tape monitor cannot be used when input is digital and turns off if
you select digital input.
³Depending on the setting, the graphic equalizer can cause distortion.
»
D
Muting the volume
Press [MUTING].
The message “MUTING ON NOW” runs repeatedly from right to left
across the display as long as the muting function is on.
To cancel
Press [MUTING].
Muting is also canceled when the receiver is turned off.
»
E
Dimming the receiver’s display
Press [DIMMER].
To cancel
Press [DIMMER].
To Next Page
Loading...
