MENU
SKIP
PLAYPAUSE
SOUND MODE
CHANNEL VOLUME
HELP
MUTING
SUBWOOFER
STOP
RETURNDISPLAY
TV/VIDEO
TV VOL
123
DVD 6CH
456
DIGITAL
789
SFC
0
/
ENTER
DELAY
PLAY MODE ACTION CANCEL
LEVEL
SUBTITLE AUDIO ANGLE
DISC SKIP
DISC INFO
DVD
DIMMER TEST
SLOW /SEARCH
3, 4, 2, 1/
ENTER
6, 5
PLAY MODE
ENTER
RETURN
6 ∫ 1
5
Choose a track, then press ENTER.
No Track
Disc
Press PLAY to start
1
Play
Clear
Clear all
SELECT
PLAY MODE
ENTER
RETURN
6 ∫ 1
5
Choose a track, then press ENTER.
No Track
Disc
1
Play
Clear
Clear all
SELECT
5
1
PGM
CD
3
3
PGM
CD
PLAY MODE
ENTER
RETURN
6 ∫ 1
5
Choose a track, then press ENTER.
No Track
Disc
Play
Clear
Clear all
1
2
SELECT
5
23
3
PGM
CD
DIRECT TUNING/
DISC
123
45
Press PLAY to start
Press PLAY to start
Changing the play sequence
Program play
[VCD] [CD]
Remote control only
You can select up to 32 items (tracks and discs) to play in the order
you choose.
1 While stopped
Press [PLAY MODE] until the program
play screen appears.
2 Press [DIRECT TUNING/DISC] and
[1]–[5] to select the disc.
3 Press the numbered buttons to select
the track.
³To select a 2-digit number
³Example: To select track 23, press [L/ENTER], then [2]
and [3].
³To enter the disc as one item, press [3, 4] to select “ALL”
and press [ENTER].
³Repeat steps 2 and 3 to enter other items.
³To select tracks on the same disc, simply press the numbered
buttons to select the next track.
4 Press [1] (play).
Play now begins in the programmed sequence.
Note
³You can enter tracks and discs the unit cannot find, or DVDs, if the
unit has not read the disc, but these are cleared during play.
³You cannot enter non-existent items or DVDs if the changer has read
the disc.
³You can not start play by pressing [DIRECT TUNING/DISC] and
[1]–[5] while in the program mode.
To select discs and tracks in step 2 and 3 using the cursor
buttons
Press [ENTER] and [3, 4] to select a disc, then press [ENTER].
Press [3, 4] to select a track and press [ENTER].
To add or change tracks
Press [3, 4] to select an available item, then repeat step 2 and 3.
To move to the page before or after the one shown
Press [6, 5].
To clear the programmed items one by one
Press [3, 4] to select the track and press [CANCEL].
(Alternatively you can select “Clear” and press [ENTER].)
To clear the whole program
Move to “Clear all” with [3, 4, 2, 1] and press [ENTER].
The whole program is also cleared when the unit is turned off.
To exit the program mode
Press [PLAY MODE] until the program play screen disappears.
³The program is retained in memory.
Disc No. Track No. Program No.
To Next Page
Loading...
