20
VQT4E52
Connect to the terminals of the same colour.
≥ Connect only after all other connections are complete.
[For[South[East[Asia[and[the[Middle[East[
Use the AC mains lead that matches the socket for the area you live in.
≥ The active subwoofer consumes a small amount of AC power, even when it is in standby mode (Approx. 0.12 W). In the
interest of power conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
Speaker cable connection
A RED
Front speaker (Rch)
B WHITE
Front speaker (Lch)
AC mains lead connection
A To a household mains socket
[For[the[United[Kingdom,[Ireland,[Saudi[Arabia[and[Kuwait[
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
Saving energy
This system is designed to conserve its power consumption and save energy.
≥ This system will automatically switch to standby mode when no signal is input and no operation is performed for approx.
2 hours.
VOLT ADJ
110-127V• •220-240V
Active subwoofer
(For South East Asia and the Middle East)
Before connecting the AC mains lead
Set the voltage.
Use a flat-head screwdriver to move the voltage
selector to the appropriate position for the area in
which this system is used.
SC-HTB20EBEGGNGS_VQT4E52.book 20 ページ ２０１２年２月２４日 金曜日 午後７時５１分
To Next Page
Loading...
