Panasonic SC-HTB20 Operating Instructions

Reference
29
VQT4E52
Specifications

1 Specifications are subject to change without notice.
2 Weight and dimensions are approximate.
3 Total harmonic distortion is measured by a digital spectrum
analyzer.
4 Total harmonic distortion is measured by using AES17 filter.
AMPLIFIER SECTION
RMS output power
10 % total harmonic distortion
Subwoofer ch
110 W per channel (100 Hz, 3 ≠)
Front ch (L, R ch)
65 W per channel (1 kHz, 6 ≠)
Total RMS Dolby Digital mode power
240 W
TERMINAL SECTION
HDMI
This unit supports “HDAVI Control 5” function.
HDMI AV input (BD/DVD) 1
Input connector
Type A (19 pin)
HDMI AV output (To TV (ARC)) 1
Output connector
Type A (19 pin)
Digital audio input
Optical (TV, AUX) 2
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
Audio format
LPCM, Dolby Digital, DTS Digital Surround
Speaker output
(Front L, R) 2
SUBWOOFER SECTION
1 way, 1 speaker system (Bass reflex type)
Woofer 16 cm cone typek1
MAIN UNIT GENERAL
Power consumption 52 W
In standby condition Approx. 0.12 W
(When the other connected devices are turned off)
Power supply
For EB/EG/GN: AC 220 V to 240 V, 50 Hz
For GS: AC 110 V to 127 V/220 V to 240 V, 50/60 Hz
Dimensions (WkHkD)
180 mmk408 mmk305 mm
Mass
5.5 kg
Operating temperature range
0
o
C to 40
o
C
Operating humidity range
20 % to 80 % RH (no condensation)
FRONT SPEAKER
SECTION
1 way, 1 speaker system (Bass reflex type)
Full range
3.5 cm k10 cm cone typek1
SPEAKER GENERAL
Horizontal Placement using the Stands
Dimensions (WkHkD)
755 mmk91 mmk75 mm
Mass
1.3 kg
Horizontal Placement using the Speaker Feet
Dimensions (WkHkD)
755 mmk52 mmk58.5 mm
Mass
1.3 kg
Horizontal Placement (for wall mount)
Dimensions (WkHkD)
755 mmkApprox. 49 mmk58.5 mm
Mass
1.3 kg
Vertical Placement using the Speaker bases
Dimensions (WkHkD)
126 mmk430 mmk130 mm
Mass
0.7 kg
Vertical Placement (for wall mount)
Dimensions (WkHkD)
Approx. 49 mmk377.5 mmk58.5 mm
Mass
0.6 kg
Model number suffix and destination
EB The United Kingdom and Ireland
EG Continental Europe
GN Australia and New Zealand
GS South East Asia and the Middle East
SC-HTB20EBEGGNGS_VQT4E52.book 29 ページ ２０１２年２月２４日 金曜日 午後７時５１分

Panasonic SC-HTB20 Specifications

General

Audio decoders	Dolby Digital, Dolby Pro Logic II
RMS rated power	240 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Impedance	6 Ω
Woofer diameter	160 mm
Soundbar speaker RMS power	130 W
Total Harmonic Distortion (THD)	10 %
Receiver included	No
Product color	Black
Recommended usage	Home theatre
Apple docking compatibility	Not supported
Soundbar dimensions (WxDxH)	755 x 58.5 x 49 mm
Subwoofer dimensions (WxDxH)	180 x 305 x 408 mm
HDMI in	1
Connectivity technology	Wired
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	52 W

Weight and Dimensions

Soundbar weight	1300 g
Subwoofer weight	5500 g