11.6. Multi-window adjustment
Name of measuring instrument Connection Remarks
Base Band generator
Condition Remarks
Sub contrast adjustment is finished.
Preparation
1. Come out of market mode and input AV1 PAL 100% full white.
2. Go into service mode, choose VIDEO Gain2, and check that data is 255.
(Check that initial value is the default)
Adjustment Remarks
1. Check the brightness of main screen and sub screen by watching.
2. Go to procedure 3 when the brightness of sub screen is higher than that of main screen.
Oppositely, do not adjust and end when the brightness of sub screen is lower than that of
main screen.
3. Adjust VIDEO Gain2 so that the borderline of main and sub screen may become
unremarkable by watching.
Press OK button.
40
TH-42PV60A / TH-42PV60H / TH-42PV60M / TH-42PV60MT
To Next Page
Loading...
