Panasonic VL-SVN511BX - Page 49

49
VL-SVN511BX/VL-SVN511CX/VL-SVN511CX1
10.1.4.1. Factory Setup
Initialize the logs and the all parameters except for the factory adjusted value, and delete the recorded images.
1. Select “FACTORY SETUP” by Navigation key.
2. Press [F4 (DECIDE)].
3. Press [F4 (RUN)].
• If “WiFi module starting ...” is displayed, wait until disap-
pear.
4. Press [F4 (RESET)] .