51
VL-SVN511BX/VL-SVN511CX/VL-SVN511CX1
10.1.4.3. Advance settings Mode
This setting is optional settings for e-mail transmission.
Entering Advance settings Mode:
1. Turn AC Power “ON”, while pressing [OFF] button, [TALK] button and [F1] at the same time, about 5 seconds or more.
Function Setting List
[ ] : It is the contents of the initial value.
In order to exit Advance settings Mode:
1. Press the [OFF] button.
10.1.4.4. Apartment mode
This setting is used connect the Main Monitor Station to “Lobby Station” or “Video Intercom System for Apartment Complexes”.
Note: When this mode is selected, all data and images will be initialize.
Entering Advance settings Mode:
1. Turn AC Power “ON”, while pressing [OFF] button, [TALK] button and [F2] at the same time, about 5 seconds or more.
Function Setting List
[ ] : It is the contents of the initial value.
In order to exit Apartment Mode:
1. Press the [OFF] button.
Function Menu Settings and Overview
SMTP authentication type Selection: [Auto], CRAM-MD5, PLAIN, LOGIN
If you can not send mail to SMTP authentication, depending on the configuration of the server, it can
be resolved by changing the setting to such as "PLAIN" and "LOGIN".
TLS version Selection: Version 1.0, [Version 1.2]
If you can not send e-mail due to the version mismatch of the security type (TLS), and depending on
the setting of the mail server, it can be resolved by changing the setting to such as “version 1.0” and
“version 1.2”.
Function Menu Settings and Overview
House mode Selection: Display, [Don't display]
Display: Use only when connecting the “Lobby Station” (VL-V590) in House mode.
Apartment mode It is used when connecting to the “Video Intercom System for Apartment Complexes”.
It switches automatically to Apartment mode in the communication settings from the PC tool.
Please use when switching manually.
To Next Page
Loading...
Need help?
General
