14
6 Click "Properties".
The "Local Area Connection 2 Properties" window
will be displayed.
7 Click "Internet Protocol (TCP/IP)", and then click
"Properties".
The "Internet Protocol (TCP/IP) Properties" window
will be displayed.
8 Click "Use the following IP address" and enter
the IP address and the subnet mask as follows;
IP address: Set in the same subnet as the record-
er's.
Depending on the network configuration, it is neces-
sary to configure the default gateway. Refer to a
system administrator for information on how to con-
figure the setting.
9 Click the [OK] button and close the window.
To Next Page
Loading...
