Panasonic WJ-ND400K

13
Network settings of a PC
Change the TCP/IP setting of the PC to conform to the settings of the recorder. It is necessary to set the IP address
of the PC and the client PC port of the recorder in the same subnet to access the recorder.
In these operating instructions, the settings are performed on Windows XP as examples. When using an operating
system other than Windows XP, refer to the operating instructions of the OS in use.
Example: When using the recorder with the default (IP address: 192.168.1.250), set the IP address of the PC to
"192.168.1.xxx (a number from 2 to 254 except 250)".
1 Log in to the PC as an administrator.
2 Click "Start" on the taskbar, and then click the
"Control Panel".
3 Click the "Network and Internet Connections"
icon.
The "Network and Internet Connections" window
will be displayed.
4 Click "Network Connections".
The "Network Connections" window will be dis-
played.
5 Double click "Local Area Connection".
The "Local Area Connection 2 Status" window will
be displayed.